Reverb
White key 13. From a room to a long wash; the tail rings on after you let go.
| Knob | Page 1 | Page 2 |
|---|---|---|
| 1 | Decay (default 60%) | Freeze: the input shut and the room held (default off) |
| 2 | Diffusion (default 60%) | Pre-delay: up to 250 ms before the room starts (default none) |
| 3 | Tone: dark to open (default 60%) | Band: what goes in, right a low cut, left a high cut |
| 4 | Ducking: the room ducks under what you play (default off) | Level: the room’s level, off at the bottom, then -36 dB to +12 dB (default 0 dB, at 3/4) |
- It gets the inserts’ output and the delay’s echoes, so the echoes are reverberated while both are on.
- LEDs: the key is blue; the knobs go light blue to purple. On page 2, knob 4’s LED shows the room coming back (see Page 2).